Evo MFG 4.5" Diesel Jeep Wrangler JL Lift Kit Enforcer Suspension Systems

No review yet. Write Review
Regular price
$1,880.59
Regular price
$1,880.59
Sale price
$1,880.59
Shipping calculated at checkout.
Hurry! Only
0
units left in stock!
Reassurance Image
Fast Free Shipping
On orders $1,000+
Reassurance Image
Quality Service
For all customers
Reassurance Image
Made In The USA
Support your own
Reassurance Image
Financing Available
Get it now & pay later

Sku : EVO-3054S3D

The EVO MFG 4.5” JLU High Clearance Long Arm kit will lift your JLU 4.5”s. Through specifically designed bracketry we accomplish the ultimate in suspension and chassis clearance, larger wheel travel ability, and optimal suspension geometry with increased ride quality. Clearance, ride quality, performance, and ease of installation were our focus in creating this long arm suspension system.

The front arms mount tucked up inside is nearly flush with the bottom of the frame mounting inches above the stock front lower mounting bracket.

The rear mounting locations for the long arm are on the side of the frame, above the bottom giving inches of clearance over the factory locations as well.

Keeping optimal geometry while maintaining as much clearance was critical in the design of this system. In doing so, not only did we raise the rear control above the frame but we raised its mounting at the rear axle by multiple inches as well.

This allows for an incredible ground clearance increase but just as importantly retains flat and optimal control arm angles giving ideal ground clearance, smooth ride quality, and long travel ability.

The mounting brackets are specifically designed to require no exhaust cutting on Jeep Wrangler JLU’s and have full-length hard-face mounting surfaces that weld to your frame giving redundant and ample welding area and strength to their mounting.

The mounting brackets align to the frame simply using existing factory holes giving complete assurance of proper locating during installation. Simply bolt brackets up to the frame with existing hardware and weld them in place.

These kits come with a set of 4.5” HD Lift springs which will keep the Jeep Wrangler JLU level side to side and will maintain unique and compliant ride quality.

EVO MFG Long Arm joints feature Johnny Joints on both ends of the control arms for restriction-free articulation and motion with no wearable and limited bond rubber. All EVO MFG lower long arms are built with strength in mind.

These arms are made from industry-leading 2.0” x .281” wall Steel DOM Tubing. Included in these kits is front brake line extension brackets, Rear swaybar end links, and front and bumpstop extensions. Cutting, grinding and welding of frame brackets required.

The EVO MFG 4.5” HD High Clearance Long Arm kits require no driveshaft or exhaust modifications (your shock choice may require this, contact the manufacturer to be sure). Allow for use of your choice of aftermarket 3/5” lift shocks.

EVO3056DK kits come with EVO SPEC King 2.5” Remote Reservoir shocks all 4 corners. 4.5” lift is based on the increase of our 4 Door Rubicon. Actual Increases will vary

4 Door Sport and Sahara Models will see slightly higher increases over stock and will match the overall lift height of a Rubicon Model.

2 Door Models (all) will see slightly higher increases in lift. Increases will vary. Note: Depending on actual tire variances and sizes, Some minor factory inner liner plastic may need to be trimmed/removed to fully clear some tires under compression. These kits require wheel spacers or aftermarket wheels with smaller backspacing. Front and rear adjustable trackbars are included with PLUS “P” kits.

All Products Manufactured by EVO Manufacturing shall have a Limited Lifetime Warranty on defects in material and craftsmanship.

All products must be on the original vehicle it was installed on by the original purchaser and is not transferable

Proof of purchase is required for all warranty claims

EVO Manufacturing is not responsible for any labor charges, shipping charges and other costs in result of a warranty claim of any EVO Manufacturing product

EVO Manufacturing is not responsible for any and all costs associated with incidental and consequential damages and are excluded under this warranty, regardless of when, where or why the warranty occurs

All EVO Manufacturing products must be deemed to be installed correctly, unaltered, free from abuse and combined with other appropriate equipment/products/components.

All return/warranty products must be recieved in new, unused, unmodified, undamaged condition to qualify for credit. 

Exceptions to stated warranty:

Wearable items are not included in warranty.  These products include but are not limited to tie rod ends, draglinks, bushings, bump stops, bearings, heim joints, uniballs/spherical bearings etc. and hardware

Any substitution of other manufactures components or exemption of required and or supplied components will immediately void all warranties.

EVO Manufacturing does not warranty any product not manufactured by EVO Manufacturing.

EVO Manufacturing warranty applies to only products purchased, sold, installed and remaining in the United States of America.

All product finishes provided are warranted to be free from defects at time of sale only.

Springs and Shocks are warrantied against manufacturing defects only and are only returnable if they have not been installed on a vehicle.

EVO Manufacturing products that are used for competition and or racing immediately void all warranties.

EVO Manufacturing recommends the installation of EVO MFG products be installed by certified technicians only.

EVO Manufacturing is not responsible or liable for any loss, damage, injury whether consequential, ordinary, direct, special or incidental arising from the manufacture, sale, resale, installation, delivery, possession, handling and or use of its products.

Electronic components and products provided by EVO MFG will have a 90 Day Warranty and must be deemed free if any tampering or accidental damages or abuse.

EVO Manufacturing is not responsible for any typographical errors in either pricing or content related to all EVO Manufacturing related products, items, websites, packaging, instructions etc.

Disclaimer: EVO Mfg. disclaims any other warranties, whether express or implied, beyond those set out in the above-entitled “Warranties” provision. Warranties specifically disclaimed include but are not limited to any implied warranties, any warranty of suitability, any warranty of merchantability, or any warranty of fitness for a particular purpose.